2-Position Selector Valves

LabSmith Microfluidics Components

LabSmith's 2-position, 3-port selector valves provide "L" pattern flow routing at pressures up to 10 kpsi, zero dead volumes and low swept volumes from 130-520 nl. Valves feature low-bounce, high-cycle switching and are easily mounted on all styles of breadboards. Models are available for 360 µm, 1/32” or 1/16” tubing. All styles feature rapid flow response time, low carryover, small footprints, and inert, durable wetted materials.

A one-piece fitting is required for each fluid connection.

Manual Selector Valves

LabSmith’s MV201 2-position, 3-port selector valves offer low-bounce, manual switching. These valves provide "L" pattern flow routing at pressures up to 10 kpsi, zero dead volumes and low swept volumes from 130-520 nl. MV201 models are available for 360 µm, 1/32” or 1/16” tubing. Valves feature high-cycle switching, rapid flow response time, low carryover, small footprints, and inert, durable wetted materials. Easily mounted on all styles of breadboards. A one-piece fitting is required for each fluid connection.

CapTite microfluidics 2-position selector valve







Automated Valves

LabSmith’s AV201 automated 2-position valves, part of LabSmith's uProcess system of automated fluid routing products, add programmable control over fluid switching. These valves provide "L" pattern flow routing at pressures up to 10 kpsi, zero dead volumes and low swept volumes from 130-520 nl. Models are available for 360 µm, 1/32” or 1/16” tubing. Valves feature high-cycle switching, rapid flow response time, low carryover, small footprints, and inert, durable wetted materials. Easily mounted on automated breadboards. A one-piece fitting is required for each fluid connection. Manual valves are also available.

LabSmith uProcess Brochure

 

uDevices 4MV01 Automated Valve Manifold controls up to 4 LabSmith automated valves







Valve Manifold

A 4VM01 Valve Manifold is required to control automated valves. One 4MV manifold can control up to 4 automated valves.

uDevices 4MV01 Automated Valve Manifold controls up to 4 LabSmith automated valves

The manifold plugs into uProcess and iBB breadboards, or directly to an Electronic Interface Board, for control through uProcess software.

LabSmith uPB-05 breadboard, 4VM01 Valve Manfiold, AV201 Automated valves

Two AV201 automated valves with 4VM01 Valve Manifold and EIB Electronic Interface Board (both required), and optional uPB-05 breadboard.

The Valve Starter Package includes automated valves, breadboard, Electronic Interface Board, interconnects and mounting hardware.

Selector Valves
Model
 Style Through Hole Diameter
Swept Volume (See Fig. A)
Valve Volume (See Fig. B) Dimensioned Drawing
MV201-C360 Manual
0.01” [250µm]
130 nl
170 nl
LabSmith Captite Microfluidic Valves
MV201-T132 Manual
0.01” [250µm]
130 nl
170 nl
MV201-T116 Manual
0.02” [510µm]
520 nl
1.1 µl
AV201-C360 Automated 0.01” [250µm]
130 nl
170 nl
 
AV201-T132 Automated 0.01” [250µm]
130 nl
170 nl
AV201-T116 Automated
0.02” [510µm]
520 nl
1.1 µl

LabSmith CapTite Microfluidic Valves LabSmith CapTite Microfluidic Valves

Products listed are typically in stock for immediate shipment. Custom components, sizes and materials are also available.