|
The photo above shows the compact nature of CapTite
components
— a welcome relief from bulky, multi-piece fittings and components.
Setups for simple tasks such as one-step separations can be built
up in a fraction of the time and footprint of other fittings.
CapTite components let you create complex
setups, including complete sample prep and analysis systems, that
cannot be easily built using other methods. You can also add bonded-port
connections to route fluids through and between chips securely:
no more world-to-chip headaches!
All CapTite components are designed for low dead
volumes and easy cleaning, enabling long life over multiple runs.
Complete construction kits are available, with everything you need
to build up experiment after experiment, for great value with little
waste, at a fraction of the price of other components.
 |
Fiberglass breadboards enable rapid positioning and mounting
of components to create an endless array of reusable setups.
Compatible with all LabSmith interconnect components, the
breadboard has holes on 1/4-inch centers and includes standoffs,
non-slip feet and mounting screws. Dimensions: 4" W
x 6" L x 1/4"H (102mm W x 204mm L x 6.4mm). |
 |
These compact PEEK™ fittings connect capillary or tubing
to other CapTite components. Precision-manufactured seats provide
high pressure seals to 5 kpsi finger-tight or 10 kpsi tool-tight,
with no sleeves. Reliably seal hundreds of times, with easy
clean-up and re-use. Diameter: 0.12" (3mm). Other materials
available upon request.
Dimensions
drawing. |
 |
Use in place of one-piece fittings to plug ports. Diameter:
0.12" (3mm). PEEK™.
Dimensions
drawing. |
 |
These two-piece fittings adapt 360µm capillary 1/16” tubing
systems, or vice versa. PEEK™. |
 |
Ultem® interconnects enable fast, high pressure, multi-port
interconnection. Precise mating of capillary or tubing provides
minimal dead volumes. Mounting holes allow easy positioning
on breadboard. One-piece fittings required for connections. 1/16"
inteconnect dimensions: 0.65"
W x 0.65" L x 0.26" H (16.5mm W x 16.5mm L x 6.5mm
H).
360µm
Interconnects Dimensions
drawing. |
 |
Ultem® cross interconnects enable fast, high pressure,
multi-port interconnection. Precise mating of capillary or
tubing provides minimal dead volumes. Mounting holes allow
easy positioning on breadboard. One-piece
fittings required for connections.
1/16"
inteconnect dimensions: 0.65"
W x 0.65" L x 0.26" H (16.5mm W x 16.5mm L x 6.5mm
H). 360µm
Interconnects Dimensions
drawing. |
 |
These manually-controlled, 3-port selector valve provides "L" pattern
flow routing at pressures up to 10 kpsi. Stable, high-cycle
switching. Mounting holes for breadboard positioning. Dimensions:
0.5"
W x 0.5" L x 1.25" H (13mm W x 13mm L x 32mm H) w/
mounting base (includes knob). Knob is 0.75" (19 mm) diameter.
One-piece fittings required for connections. |
 |
Micro-liter volume cartridges can be filled, and refilled,
with many types of packing. Easily disassembled and cleaned,
cartridges enable high-speed processing of small volumes
(2ul-100ul) for high throughput sample preparation. Two one-piece
fittings and four 10µm polyester sample filters included.
Made of biocompatible PEEK. Brochure. |
 |
These Ultem® adapters bond directly to substrates or devices
to accept ferrules to connect capillary tubing. Alignment shoulder
provides easy, accurate interface to 1mm chip port. Dimensions:
5 mm diam x 5 mm H (0.2" diam x 0.2" H) . Available
for 360µm capillary tubing only. Dimensions drawing.
Guide
to attaching Bonded-Port connectors. |
 |
Provides reliable connection from standard Luer-Lock syringes
and syringe pumps to capillary or tubing. Interfaces with
ferrules. Luer-Lock is 0.375" (10 mm) outer diameter. |
 |
Complete microfluidic construction kits include breadboard,
interconnects, tubing, syringe adapter, and more. Choose from 360µm
Single User, 360μm
Capillary
Interface, 360μm
Chip Interface or 1/16"
Single User kits. The
best value for prototype and permanent construction of microfluidic
setups. |
 |
Capillary tubing, assembly wrenches, fast-set epoxy and other
supplies are available individually or as part of the Microfluidic
Construction Kits. |
Products above typically in stock for
immediate shipment. Custom components, sizes and materials are
also available.
|
